25-Amp Pro Brushless ESC
25-Amp Pro Brushless ESC featuring advanced programming and heat sinks with pre-wired EC3 connector and battery input and 3.5mm female gold bullets on motor output leads
 More Photos  View larger image
  • Up to 25-amp continuous current with proper air flow
  • Finned heat sinks for both the motor drive MOSFETs and dual BEC regulators to support up to 4 sub-micro servos
  • Programmable motor braking
  • Safe power-arm mode prevents accidental starts
  • Programmable low-voltage cutoff with settings for 2-cell Li-Po (6V), 3-cell Li-Po (9V) or 70% of battery starting voltage
  • Programmable throttle input range (1.1–1.9 ms or Auto Select)
  • Auto motor shut down if signal is lost or there is interference
  • Programmable timing—2 user-selectable ranges for use with a large variety of brushless motors
  • Pre-wired connectors—E-flite EC3 on battery input and 3.5mm female gold bullets on motor output leads
  • Soft start

This controller has been designed for use in radio control aircraft and to support continuous currents of up to 25 amps when using 2- to 3-cell Li-Po battery packs and up to 4 sub-micro servos. The ESC features a lightweight plastic case with exposed, finned heat sinks for both the motor drive MOSFETs and, unlike many controllers, the BEC regulators give you a more reliable and powerful power supply for your servos.

[EFLA1025]
Retail: $59.99
Available For*: $44.99
*At participating retailers
Specifications
  • Brake: Yes - Programmable
  • Continuous Maximum Current: 25A
  • Input Connector Types: 16AWG with E-flite EC3 connector
  • Output Connector Types: 16AWG with 3.5mm Female Gold Bullet Connectors
  • Momentary Peak Current: 30A (15 sec)
  • Length: 1.9 in (48mm)
  • Width: 1.1 in (28mm)
  • Height: 0.4 in (11mm)
  • Weight: 1.2 oz (32g)
  • Cells w/BEC: 2-3S Li-Po or 6-10 Ni-MH/Ni-Cd
Gallery
  
Optional Accessories
Support
Articles